¶ Printing different filaments without QIDI Box
1.This printing method requires manual replacement of filaments.
2. Frequent replacement of multiple filaments is not recommended.
3. It is also recommended to use flaments with similar printing temperatures.
4. It is not suitable for filaments with large differences in printing temperature.
¶ Printing with changing filaments at different layers
¶ Step1
-
Delete the original code:
"G1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]" -
Add the below gcode into the "Change filament G-code" text box：
{if layer_z > initial_layer_print_height}
M0
{endif}
¶ Step2
Add new filaments
¶ Step3
Modify the filament of the different layers.
Preview after slicing, select layer where you need to change filament.
¶ Or printing custom areas with multiple filaments(Not recommended)
Refer to the figure below to select the designated area for different filaments.
