¶ Pause and Continue
In the event of filament tangle, running out of filaments, adding the pause code "M0" or manual pause, the printer will record the printing process information. We can tap the Continue tab in the figure below to continue printing.
The default pause time limit of the machine is 24 hours. If it is too long, the machine will not be able to resume printing.
¶ Modify the pause time limit
You can find the gcode_macro.cfg file in Fluidd interface to modify the limit time.
TIMEOUT=86400 means that pause time limit is 24 hours.
For example， setting TIMEOUT=172800 and save, it means that pause time limit change to 48 hours.
