¶ Q1 Pro Adjustment belt
¶ 1.Turn off the printer at first！！！(important)
¶ 2.Referring to the diagram below, loosen the screws securing the belt tensioner. Test the belt by pulling it via hand to confirm that the belt tensioner can be moved.
Printer left：
Printer right：
¶ 3.Referring to the figure below, move the print head and stop it at the front left corner.
¶ 4.Tighten the 4 screws of belt tensioners.
¶ 5.Please do the input shaping finally.
¶ If the belt is still loose， you could print a standard block for adjustion.
Standard Block
Instruction manual
Don't forget to remove the block when adjustment is complete!