¶ How to Fix a Filament Blockage
¶ Cleaning the Extruder
- Remove the extruder.
- Remove the front extruder cover.
- Clean any jammed filament or debris inside the extruder.
- Reassemble and reinstall the extruder.
¶ If Filament Is Stuck in the Extruder Gear
- Remove the extruder.
- Remove the filament runout sensor.
- Remove the four screws.
- Disassemble the extruder.
- Clean the extruder gears and remove any jammed filament.
- Reassemble and reinstall the extruder.
