¶ Hot End Clogging
¶ Here is the video of clean the clogged filament from hotend.
https://drive.google.com/file/d/13wpVgkRguMum_qAtEFRcexT977c6tIH0/view?usp=sharing
¶ 1. Remove the front cover
¶ 2. Remove Hot End
¶ 3. Preheat the hotend to filament melt temp
¶ 4. Use allen key to push out the clogged filament from nozzle
Please hold the radiator to prevent burns from the nozzle!
¶ If the first solution is not working well, please follow the video below to dissemble the hotend and take out the clogged filament.
https://drive.google.com/drive/folders/1u-0apVcUVrfCfyvtkEK1rhIGodawNbY7?usp=drive_link
¶ 1.Remove heat sink from hot end
¶ 2.Connect the wires from the hot end to the adapter board
.png)
¶ 3.Preheat the hotend to filament melt temp
¶ 4.Remove residual filament with sharp-nosed pliers and tweezers
.png)