¶ Activated Carbon Air Filter — X-Plus 4
The X-Plus 4 is equipped with an activated carbon air filter.
When the chamber circulation fan is operating, the filter removes airborne particles and odors from the chamber air before discharge.
Service life:
Approximately 1440 hours (60 days of cumulative printing time).
Replacement filters are available from the official store:
X-Plus 4 Activated Carbon Filter
¶ Replacement Guide
¶ Filter location
The filter is located at the rear of the chamber.
¶ Step 1 — Remove the filter assembly
Push the filter upward and remove it from the housing.
¶ Step 2 — Replace the filter element
Remove the used filter element.
Insert a new activated carbon filter element into the housing.
¶ Step 3 — Reinstall the filter
Reinsert the filter assembly into its original position.
