¶ X-Axis Carbon-Fiber Rods Clean-up
- Wet the carbon fiber rods with alcohol or isopropanol, and gently rub the carbon rods to clean any debris with a dust-free cloth.
Please refer to the following operation video.
https://drive.google.com/file/d/1Qw4-c7Stc6foilBImN6iCLXYiTIBzXL7/view?usp=sharing
Many thanks to our kind customer @Logan Kes for filming and producing the video.
- Wipe the carbon fiber tube with a cloth, and repeat steps 3 to 5 until there is no stain on the print head bearing and carbon fiber tube.
- After cleaning, perform resonance compensation once.
- Note: The X-axis rod needs to be cleaned every 1-2 weeks.