¶ Overview
The Seal button is primarily used to control the auxiliary component cooling fan to balance the chamber temperature.
¶ Function
Seal has two states: ON and OFF.
It can be toggled via the switch in the filament settings panel.
-
ON
When the Seal button is enabled, the auxiliary component cooling fan defaults to operating at maximum speed, as shown below.
-
OFF
When the Seal button is disabled, the auxiliary component cooling fan will turn off.
Printing Tip: If you prefer printing with the top cover and printer door closed, it is recommended to enable the Seal function to improve air circulation and heat dissipation within the chamber.
Note: The Sealing function provides limited heat dissipation. During hot weather, it is still advisable to open the top cover and printer door for printing.