¶
Manual
¶
Introduction
Introduction to X-Plus 4
Introduction to QIDI Link
X-Plus4 UI Introduction
Timelapse
Pause and Continue
Power loss recover
X-Plus4 Motherboard Diagram
¶
Setting Up
X-Plus4 unboxing
Supplementary instructions for accessories in the box
¶
Printing
Loading filament
Replacing filament
Print from USB flash drive
Print from QIDI Studio
First print with an internal file
¶
Firmware
X-Plus4 Firmware Update
Wi-Fi / Network connection guide
¶
Maintenance
¶
Periodic Maintenance
X-Plus4 Maintenance Manual
¶
Replace And Adjust
X-Plus4 Replace Nozzle
X-Plus4 Replace Hot End
Modify camera setting
X-Plus4 Belt Adjust
Activated Carbon Air Filter Replacement Guide
Replace the thermal conductive silicone grease
Replace the chamber heater
Replace the SSR of chamber heater
¶
Tips
Printing different filaments without QIDI Box
¶
Troubleshooting
X-Plus4 Filament Clogging
X-Plus4 How to fix the Platform (Z-axis ) tilt problem
Filament not sticking to the bed
X-Plus4 How to auto bed leveling
Export Log
Flash emmc
Fluidd interface display error